Sony DCR-TRV260 Camera Operations Guide - Page 23
Recording for a longer time, Using zoom, Using the built-in light - digital 8
View all Sony DCR-TRV260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Recording for a longer time To record for a longer time In the (TAPE SET) menu, select [REC MODE], then [LP] (p. 54). In the LP mode, you can record longer than when recording in the SP mode (2 times longer for TRV128/228/328/428, 1.5 times longer for TRV260/265). A tape recorded in the LP mode should be played back only on this camcorder. Using zoom Move the power zoom lever slightly for a slower zoom. Move it further for a faster zoom. To record wider range of view Move the power zoom lever towards W. The subject appears farther away (Wide angle). To record closer view Move the power zoom lever towards T. The subject appears closer (Telephoto). Using the built-in light When the CAMERA mode is selected, you can choose zoom to magnification levels greater than 20 times, and from that point activate the digital zoom ([D ZOOM], p. 47). Occasional use of the zoom is effective, but use it sparingly for best results. You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1.5 m (5 feet). Built-in light Recording 1 cm (approx. 80 cm (approx. 1/2 inch)* 2 5/8 feet)* * The minimum distance required between your camcorder and the subject to get a sharp focus in that position of the lever. LIGHT Press LIGHT repeatedly to select a setting. The settings are displayed cyclically in the following order. No indicator displayed: Always records without using the built-in light. m : Automatically turns on and off according to the ambient brightness. m : Always turns on. To turn off the built-in light Press LIGHT repeatedly until no indicator appears on the screen. ,continued Recording 23