Sony DCR-TRV730 Operating Instructions - Page 13

Getting started Step 1 Preparing the power supply Note Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC power adaptor. This may cause a short-circuit, damaging the AC power adaptor. When the battery pack is charged fully The LCD backlight of the display window is turned off. Remaining battery time indicator The remaining battery time indicator in the display window roughly indicates the recording time with the viewfinder. Until your camcorder calculates the actual remaining battery time "- - - - min" appears in the display window. While charging the battery pack, no indicator appears or the indicator flashes in the display window in the following cases: - The battery pack is not installed correctly. - Something is wrong with the battery pack. If the power may go off although the battery remaining indicator indicates that the battery pack has enough power to operate Charge the battery pack fully again so that the indication on the battery remaining indicator is correct. When you use the AC power adaptor Place the AC power adaptor near a wall outlet. If any trouble occurs with this unit, disconnect the plug from the wall outlet as soon as possible to cut off the power. Recommended charging temperature We recommend charging the battery pack in an ambient temperature of between 10 °C to 30 °C (50 °F to 86 °F). What is "InfoLITHIUM"? The "InfoLITHIUM" is a lithium ion battery pack which can exchange data such as battery consumption with compatible electronic equipment. This unit is compatible with the "InfoLITHIUM" battery pack (M series). Your camcorder operates only with the "InfoLITHIUM" battery. "InfoLITHIUM" M series battery packs have the mark. "InfoLITHIUM" is a trademark of Sony Corporation. TM SERIES 13