Sony DNF430 Operating Instructions - Page 35

Additional Information Symptom The CD does not play, or "No Disc" appears on the display when a CD is placed in the player. "HOLD" flashes on the display when you press a button, and the CD does not play. Playback starts from the point you stopped (resume function). During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. "No File" appears on the display after you press  or when the lid of the player is closed. Cause and/or corrective action  The CD is dirty or defective. Clean it or change it.  Check that the CD is inserted with the label side up ( page 15).  Moisture condensation* has occurred. Leave the CD player aside for several hours until the moisture evaporates. * Moisture is likely to condense on the lense inside the CD player when you bring the player from the cold outdoors into the warm indoors.  Close the lid of the battery compartment firmly ( page 12).  Make sure the battery is inserted correctly ( page 12).  Connect the AC power adaptor to an AC outlet securely ( page 14).  Press  after one second or more has passed since the AC power adaptor was connected.  The CD-R/CD-RW in the player is blank.  There is a problem with the quality of the CD-R/CD-RW, recording device, or application software.  The buttons are locked. Slide the HOLD switch back ( page 17).  The resume function is working. To start play from the first track, press and hold  while the player is stopped until the first track starts playing, or open the lid of the player ( page 16). Or, remove all power sources, and then insert the battery or connect the AC power adaptor again.  This player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. The player is not malfunctioning.  There are no ATRAC/MP3 files on the CD-R/CD-RW.  A CD-R/CD-RW from which the data has been erased is being used.  The CD is dirty. Continued  35