Sony DPP FP97 Operating Instructions - Page 74
s Per Sheet, FP97 Properties
UPC - 027242764835
View all Sony DPP FP97 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Symptom Check Cause/Solutions The printer does not respond to the printing order from the PC. - c If there is no trouble displayed on the Windows desktop, check the printer's LCD screen. If the printer shows trouble, do the following: 1. Turn off the 1 (on/standby) button of the printer. 2. Disconnect the power cable, wait for 5 to 10 seconds, and then connect the cable again. 3. Restart your computer. If these do not solve the problem, consult with your Sony dealer or service facilities. An image is printed with borders even if I select "Borderless." • Are you using an application software other than PMB? c When using an application other than the PMB, an image might be printed with borders even if you select borderless print. When you can set border/borderless with an application, set an image to be printed fully in the print range even if it is printed over the range. Print quantity specified in the "Pages Per Sheet" in the "Layout" tab of the "Sony DPPFP97 Properties" dialog box does not match the actual print quantity and printed results. - c Depending on the application you use, the print quantity setting of the application you use may have priority over the setting specified in the printer driver dialog box. Colors of the printed image from a PC are different from those printed from a memory card. - c Since the process in printing an image from a memory card differs that in printing from a PC, the colors may not be exactly identical. An error stating "Error was found while a document is output to the USB device." is displayed. - c Disconnect the USB cable and then connect it again. 74 GB