Sony DSC P1 Operating Instructions - Page 15
Basic operations, Recording still images
UPC - 027242581364
View all Sony DSC P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Basic operations Recording still images B Recording Still images are recorded in JPEG format. To record still images, slide the POWER switch to turn on the power and insert a "Memory Stick." POWER switch B Recording 1 Set the MODE selector to STILL. 2 Press and hold the shutter button halfway down and check the image. While the AE lock indicator z (green) is flashing rapidly, the image freezes momentarily, but is not yet recorded. When the camera finishes the automatic adjustments*, the AE lock indicator z stops flashing rapidly and lights up.** The camera is ready for recording. To cancel the recording, release the shutter button. Remaining memory capacity indicator AE lock indicator 3 Press the shutter button fully down. The shutter sounds and the image is recorded on the "Memory Stick." When "RECORDING" disappears, you can record the next image. ∗ Exposure and focus are automatically adjusted. ∗∗ When the AE lock indicator z changes to flashing slowly, the subject may be difficult to focus on (dark or no contrast) or the subject may be extremely close. Release the shutter and focus again, and be sure to check the picture after recording. If you skip step 2 and press the shutter fully down The shutter sounds and the image is recorded on the "Memory Stick". You cannot record an image when: - The recording conditions require a flash and the strobe charge lamp (page 17) is flashing. 15