Sony DSC P1 Operating Instructions - Page 26

Installing the USB driver, For Windows 98, Windows 98SE and Windows 2000 users - software

Page 26 highlights

Installing the USB driver Before connecting your camera to your personal computer, install the USB driver to the computer. The USB driver is contained together with application software for viewing images on a CD-ROM which is supplied with your camera. For Windows 98, Windows 98SE and Windows 2000 users 1 Turn on your personal computer and allow Windows to load. 2 Insert the supplied CD-ROM in the CD-ROM drive of your personal computer. The application software screen appears. 3 Click "USB Driver Installation for Windows 98/98SE, Windows 2000". USB driver installation starts. 4 Follow the on-screen messages to install the USB driver. 5 Connect the USB jack (mini-B) on your camera with the USB connector on your personal computer using the supplied USB cable. to the USB connector to the USB jack (mini-B) Personal computer USB cable Push in until the connector clicks into place 6 Insert a "Memory Stick" into your camera, connect the AC power adaptor and turn on your camera. "PC MODE" appears on the LCD screen of your camera and the camera is set to communication standby mode. Your personal computer recognizes the camera, and the Windows Add Hardware Wizard starts. 7 Follow the on-screen messages to have the Add Hardware Wizard recognize the hardware. The Add Hardware Wizard starts twice because two different USB drivers are installed. Be sure to allow the installation to complete without interrupting it. Note In step 7, make sure that a "Memory Stick" is inserted in your camera. Otherwise, you will be unable to install the USB driver. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

26
Before connecting your camera to your personal computer, install the USB driver to
the computer. The USB driver is contained together with application software for
viewing images on a CD-ROM which is supplied with your camera.
For Windows 98, Windows 98SE and Windows 2000 users
Note
In step 7, make sure that a “Memory Stick” is inserted in your camera. Otherwise, you will be
unable to install the USB driver.
Installing the USB driver
1
Turn on your personal computer and allow Windows to load.
2
Insert the supplied CD-ROM in the CD-ROM drive of your personal
computer.
The application software screen appears.
3
Click “USB Driver Installation for Windows 98/98SE, Windows
2000”.
USB driver installation starts.
4
Follow the on-screen messages to install the USB driver.
5
Connect the USB jack (mini-B) on your camera with the USB
connector on your personal computer using the supplied USB
cable.
6
Insert a “Memory Stick” into your camera, connect the AC power
adaptor and turn on your camera.
“PC MODE” appears on the LCD screen of your camera and the camera is set
to communication standby mode. Your personal computer recognizes the
camera, and the Windows Add Hardware Wizard starts.
7
Follow the on-screen messages to have the Add Hardware Wizard
recognize the hardware.
The Add Hardware Wizard starts twice because two different USB drivers are
installed. Be sure to allow the installation to complete without interrupting it.
to the USB connector
Personal computer
USB cable
Push in until the
connector clicks
into place
to the USB jack
(mini-B)