Sony DSC P1 Operating Instructions - Page 9
Charging the battery pack, AC-LS1A AC power adaptor, Jack cover, To the wall outlet mains - windows
UPC - 027242581364
View all Sony DSC P1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting started Charging the battery pack You cannot charge the battery pack while your camera is turned on. Be sure to turn off your camera before charging. Battery pack (S series) To the wall outlet (mains) Jack cover Power cord (mains lead) AC-LS1A AC power adaptor 1 Insert the battery pack into your camera. 2 Open the jack cover and connect the DC connecting cable to the DC IN jack of your camera with the v mark facing up. 3 Connect the power cord (mains lead) to the AC power adaptor and then to a wall outlet (mains). The battery indicator in the display window flashes when charging begins. When the battery indicator stops flashing, normal charge is completed. For full charge, which allows you to use the battery longer than usual, leave the battery pack inserted for about one hour after normal charge is completed until the battery remaining indicator and "FULL" is displayed alternately in the display window. After charging Remove the AC power adaptor. Battery remaining indicator The LCD screen on the camera shows the remaining time for which you can still record or play back images. This indication may not be entirely accurate depending on the conditions of use and the operating environment. Charging at a room temperature of 50°F to 86°F (10°C to 30°C) is recommended. 9