Sony DSC-P93A Operating Instructions - Page 106
PictBridge compliant printer, SET UP settings.
View all Sony DSC-P93A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
PictBridge compliant printer Symptom Cause Solution The connection cannot be established. • The printer is not compliant with the PictBridge standard. • The printer is not set for the connection with the camera. • [USB Connect] is not set to [PictBridge] in the SET UP settings. • Depending on the circumstances, the connection may not be established. p Consult with the printer manufacturer. p Check that the printer is turned on and can connect with the camera. p Set it to [PictBridge] (page 117). p Disconnect and connect the USB cable again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer. You cannot print images. • The camera is not connected to the printer. • The printer is not turned on. • If you select [Exit] during printing, you may not print again depending on your printer. • Movies cannot be printed. • Images modified with a computer or images shot using other than this camera may not be able to be printed. p Check that the camera and the printer are properly connected using the USB cable. p Turn on the printer. For further information, refer to the operating instructions supplied with it. p Disconnect and connect the USB cable again. If you cannot print still, disconnect the USB cable, turn off and on the printer, then connect the USB cable again. - - Printing is canceled. • You disconnected the USB cable before the - (Not disconnect USB cable) mark disappears. You cannot insert the date or print images in the index mode. • The printer does not provide these functions. • The date may not be inserted in the index mode depending on the printer. p Consult with the printer manufacturer whether the printer provides these function or not. p Consult with the printer manufacturer. "---- -- --"is printed on the • The recording date data is not recorded on the p The images that do not have the recording date data cannot be date-inserted part. image. printed with the date inserted. Set [Date] to [Off] and print it. 106