Sony DSCU60 Operating Instructions - Page 25
Selecting a flash mode, button fully down.
UPC - 027242627970
View all Sony DSCU60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Selecting a flash mode Shooting still images SELFTIMER ON OFF 2.0M 101 10 2.0M 101 10 2.0M 101 10 EXEC 3 , Select [ON] with the control button v, then press EXEC. When you press MENU, the menu disappears and the (self-timer) indicator appears on the LCD screen. • When placing the camera in a standing position, make sure the LCD screen is level. Self-timer lamp 4 , Center the subject in the LCD screen and press the shutter button fully down. The self-timer lamp flashes red and a continuous beep sounds. The image will be shot after approximately 10 seconds. To cancel the self-timer in the middle of the operation Press POWER to turn off the power. • If you press the shutter button while standing in front of the camera, the focus and the exposure may not be correctly set. , Set the mode switch to , and press the control button v ( ) repeatedly to select a flash mode. Each time you press v ( ), the indicator changes as follows. No indicator (Auto): Based on the lighting conditions, the camera will decide if there is enough light, and will use the flash accordingly. (Red-eye reduction): Flash mode is set to Auto, and the red-eye reduction operates if the flash strobes. (Forced flash): The flash strobes regardless of the surrounding brightness. (No flash): The flash does not strobe. 25