Sony DSCU60 Operating Instructions - Page 65
Insert a Memory Stick
UPC - 027242627970
View all Sony DSCU60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Symptom Cause Solution Your computer does not recognize your camera. • You are not using the supplied USB cable. • The USB cable is not connected firmly. • [USB] is set to [PTP] under [ ] in the menu settings. • The USB connectors on your computer are connected to other equipment besides the keyboard, the mouse, and your camera. • The camera is not connected directly to your computer. • The USB driver is not installed. • The camera was connected to a computer with the USB cable before installing the USB driver, so the device was not recognized by the computer. p Use the supplied USB cable (page 53). p Disconnect the USB cable, and connect it again firmly. Make sure that "USB MODE" is displayed on the LCD screen (pages 53 and 59). p Set it to [NORMAL] (page 73). p Disconnect the USB cables except for the ones connected to the keyboard, the mouse, and your camera. p Connect the camera directly to your computer without passing through a hub or other device. p Install the USB driver (pages 50 and 59). p Delete the device which is not recognized, then install the USB driver (pages 50, 55 and 59). You cannot turn on the camera during USB connection. • The camera is not connected directly to your computer. • No "Memory Stick" is inserted. p Connect the camera directly to your computer without passing through a hub or other device. p Insert a "Memory Stick" (page 18). You cannot copy images. • The camera is not correctly connected to your computer. • You are not using the correct copy procedure for your OS. - - p Connect the camera and your computer correctly using the supplied USB cable (page 53). p Follow the designated copy procedure for your OS (pages 54, 55 and 59). p If you are using the "Image Transfer" software, see page 54. p If you are using the "ImageMixer Ver.1.5 for Sony" application software, click on HELP. After making a USB - connection, "Image Transfer" does not - automatically start. p Select [Launch Image Transfer automatically when the camera, etc., is connected.] at [Basic] setting (page 55). p Make a USB connection when the computer is turned on (page 53). The image cannot be played - back on a computer. - p If you are using the "ImageMixer Ver.1.5 for Sony" application software, click on HELP. p Consult the computer or software manufacturer. Troubleshooting 65