Sony DSR 45A Operating Instructions - Page 89
Icon/Menu, Submenu, Setting, SEPARATE, LINKED, AGC CH3
UPC - 027242689602
View all Sony DSR 45A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Icon/Menu A AUDIO SET Submenu (page) Setting REF LEVEL Switches the center levels of the audio level meters displayed on the fine audio levels (page 29 (GB)) screen. -12dB: Sets the level to -12 dB. -18dB: Sets the level to -18 dB. -20dB: Sets the level to -20 dB. Notes • The default is -20 dB for DSR-45; -18 dB for DSR-45P. • The standard output level of the AUDIO OUT connectors is +4 dBu. This is equivalent to -20 dB for the DSR-45, or -18 dB for the DSR-45P from full bit (maximum audio level). This level is fixed and does not change even if you change this item setting. • Changing this level does not change the audio gain of this unit. Turn the AUDIO REC LEVEL control knobs to adjust the recording level accordingly. AGC CH1,2 Links/separates the AGC (Auto Gain Control) in channels 1 and 2. (page 29 (GB)) SEPARATE : AGC is not linked. (Channels 1 and 2 sound gains are separated.) LINKED: AGC is linked. (Channels 1 and 2 sound gains are linked as a pair.) Notes • This setting is disabled when inputting signals from the DV jack. • The LINKED setting changes to enabled after you set the AUDIO INPUT switch on the front panel to AUTO. AGC CH3, 4 Links/separates the AGC (Auto Gain Control) in channels 3 and 4. (page 29 (GB)) SEPARATE : AGC is not linked. (Channels 3 and 4 sound gains are separated.) LINKED: AGC is linked. (Channels 3 and 4 sound gains are linked as a pair.) LIMITER Notes • This setting is disabled when inputting signals from the DV jack. • The LINKED setting changes to enabled after you set the AUDIO INPUT switch on the front panel to AUTO. Turns the limiter on/off. OFF : No limiter ON: Uses the limiter. Notes • This setting is disabled when inputting signals from the DV jack. • This setting is available only when you have set the AUDIO INPUT switch on the front panel to MANU. • Make sure to set the INPUT LEVEL selector on the rear panel correctly. Even if you have set this item to ON, the limiter will not work for a sound that exceeds the dynamic range of the input amplifier. Chapter 6 Adjusting and Setting Through Menus 89 Chapter 6 Adjusting and Setting Through Menus (GB)