Sony DVP-NC555ES Operating Instructions - Page 74
Settings for the Sound (AUDIO SETUP), MULTI-DISC RESUME DVD VIDEO, VIDEO CD only, CD DIRECT
View all Sony DVP-NC555ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
selects PCM, DTS, and Dolby Digital sound tracks in this order. ◆ MULTI-DISC RESUME (DVD VIDEO/ VIDEO CD only) Switches the Multi-disc Resume setting on or off. Resume playback point can be stored in memory for up to 40 different DVD VIDEO/ VIDEO CD discs (page 34). ON OFF Stores the resume settings in memory for up to 40 discs (The settings remain in memory even if you select "OFF.") Does not store the resume settings in memory. Playback restarts at the resume point only for the current disc in the player. ◆ CD DIRECT Eliminates the use of unnecessary circuits when playing CDs. This setting will be activated when you open or close the disc tray. This function affects the output from the following jacks: - AUDIO OUT L/R 1/2 jacks - 5.1CH OUTPUT jacks OFF ON Select this when playing CD discs, including CDs with DTS tracks. Eliminates the use of unnecessary circuits needed to play CDs. Note If you select "ON" when playing CDs with DTS tracks, the sound will become noisy. Settings for the Sound (AUDIO SETUP) "AUDIO SETUP" allows you to set the sound according to the playback and connection conditions. Select "AUDIO SETUP" in the Setup Display. To use the display, see "Using the Setup Display" (page 69). The default settings are underlined. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD AUDIO FILTER: SHARP DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: D-PCM 48kHz/96kHz PCM: 48kHz/16bit ◆ AUDIO ATT (attenuation) If the playback sound is distorted, set this item to "ON." The player reduces the audio output level. This function affects the output of the following jacks: - AUDIO OUT L/R 1/2 jacks - 5.1CH OUTPUT jacks OFF Normally, select this position. ON Select this when the playback sound from the speakers is distorted. ◆ AUDIO DRC (Dynamic Range Control) (DVD only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "AUDIO DRC." This affects the output from the following jacks: - AUDIO OUT L/R 1/2 jacks - 5.1CH OUTPUT jacks - DIGITAL OUT (OPTICAL or COAXIAL) jack only when "DOLBY DIGITAL" is set to "D-PCM" (page 75). STANDARD Normally select this position. TV MODE Makes the low sounds clear even if you turn the volume down. WIDE RANGE Gives you the feeling of being at a live performance. 74