Sony DVP-NC600 Operating Instructions (DVP-NC600 CD/DVD Player) - Page 32

Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. POWER Power indicator Hx A 4 Press A on the player, and place a disc on the disc tray. The player automatically turns on and the power indicator lights up in green. To place other discs on the tray, press DISC SKIP and place the discs in the order you want to play them. Each time you press DISC SKIP, the disc tray turns so you can place the discs on the empty compartments. The player plays from the last disc placed on the tray. AUDIO DISC SKIP H 123 456 789 0 DISC SKIP ?/1 x With the playback side facing down Disc compartment number 5 Press H. The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver). 1 Turn on your TV. 2 Switch the input selector on the TV to the player. When using an amplifier (receiver) Turn on the amplifier (receiver) and select the appropriate channel. 3 Press POWER on the player. The player enters standby mode and the power indicator lights up in red. After following Step 5 Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 36), VIDEO CD (page 37). To turn on the player Press POWER on the player. The player enters standby mode and the power indicator lights up in red. Press ?/1 on the remote. The player turns on and the power indicator lights up in green. In standby mode, the player also turns on by pressing A on the player or by pressing H. 32