Sony DVP-NC600 Operating Instructions (DVP-NC600 CD/DVD Player) - Page 33
To turn off the player, Notes on playing DTS sound tracks on, Notes on playing DVDs with a DTS
View all Sony DVP-NC600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Playing Discs To turn off the player Press ?/1 on the remote. The player enters standby mode and the power indicator lights up in red. To turn off the player completely, press POWER on the player. While playing a disc, do not turn off the player by pressing POWER. Doing so may cancel the menu settings. When you turn off the player, first press x to stop playback and then press ?/1 on the remote. Notes on playing DTS sound tracks on a CD • When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jacks of the player. • Set the sound to "STEREO" using the AUDIO button when you play DTS sound tracks on a CD (page 49). • Do not play DTS sound tracks without first connecting the player to an audio component having a built-in DTS decoder. The player outputs the DTS signal via the DIGITAL OUT (COAXIAL or OPTICAL) jack even if "DTS" in "AUDIO SETUP" is set to "OFF" in the Setup Display (page 68), and may affect your ears or cause your speakers to be damaged. Notes on playing DVDs with a DTS sound track • DTS audio signals are output only through the DIGITAL OUT (COAXIAL or OPTICAL) jack. • If you connect the player to audio equipment without a DTS decoder, do not set "DTS" to "ON" in "AUDIO SETUP" (page 68). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged. • When you play a DVD with DTS sound tracks, set "DTS" to "ON" in "AUDIO SETUP" (page 68). 33