Sony DVP-NS710H Operating Instructions - Page 38

SD Displays standard definition picture with black frame. HD Displays high definition picture with black frame. HD Displays high definition picture without black frame. (1920×1080i) Displays high definition picture HD with black frame at 1920×1080 pixels. (1920×1080i) Displays high definition picture HD without black frame at 1920×1080 pixels. b • "(1920×1080i) HD " and "(1920×1080i) HD" are effective only when you set "HDMI RESOLUTION" to "1920×1080i" and "TV TYPE" to "16:9." • If you set this setting to "PhotoTV HD," "(1920×1080i) HD " or "(1920×1080i) HD," effect, rotation, and zoom function are not available. • If you want to use effect, rotation, and zoom function; sets this setting to "SD ," "HD ," or "HD." • If you set this setting to "PhotoTV HD," "(1920×1080i) HD " or "(1920×1080i) HD," next image appears after black mute. • HDMI signal will stop momentarily during loading or unloading DATA disc or USB (DVPNS728H only). • When you set to "PhotoTV HD," the player changes video signal output from "HDMI RESOLUTION" to "1920×1080i," "TV TYPE" to "16:9," and "YCBCR/RGB (HDMI)" to "YCBCR" automatically even though the current settings are kept. • Set this setting to "SD ," when you want to view photo files in analog video outputs with the HDMI connection. ◆ YCBCR/RGB (HDMI) Selects the type of HDMI signal output from HDMI OUT jack. You cannot select this when "PhotoTV HD" mode is activated (page 30). YCBCR RGB Outputs YCBCR signals. Outputs RGB signals. b • If the playback picture becomes distorted, set this setting to "RGB." • If the HDMI OUT jack is connected to equipment with a DVI jack, "RGB" signals will be automatically output even when you select "YCBCR." 38US ◆ AUDIO (HDMI) Selects the type of audio signal output from the HDMI OUT jack. AUTO PCM Normally, select this. Outputs audio signals according to the "DIGITAL OUT" settings (page 36). Converts Dolby Digital, or 96 kHz/24 bit PCM signals to 48 kHz/16 bit PCM. b A loud noise (or no sound) will be output if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals and "AUTO" is selected. In this case, select "PCM." ◆ CONTROL FOR HDMI Switches the Control For HDMI setting on or off. ON Allows you to use the CONTROL FOR HDMI features (page 12). OFF Switches this function off. ◆ LANGUAGE FOLLOW Switches the languages of the DVD player to the same as the current TV OSD language. You cannot select this when "CONTROL FOR HDMI" is set to "OFF." ON OFF Switches this function on. Switches this function off. b • Turn off any display before using this function. • The OSD language for player keeps if the TV's language cannot be supported.