Sony FWDS42H1 Operating Instructions - Page 64
Optional Adaptors, HD-SDI/SDI INPUT Adaptor BKM-FW16
UPC - 027242754423
View all Sony FWDS42H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Optional Adaptors The terminal of the OPTION slot qj (page 12) on the side of the equipment is a slot-in type. It can be switched to the following optional adapter (not supplied). For details on installation, consult your Sony dealers. For details on the optional adaptors for system expansion, see each instruction manual with this manual. COMPONENT/RGB INPUT Adaptor BKMFW11 1 Y/G, PB/CB/B, PR/CR/R IN (BNC): Connects to the analog RGB signal or component signal output of a piece of video equipment or PC. 2 HD, VD IN (BNC): Connects to the synchronization signal output of a PC. Note When inputting a component signal, be sure not to input sync signals to the HD and VD connectors. If you do so, the picture may not be displayed properly. 3 AUDIO (Stereo mini jack): Inputs an audio signal. Connects to the audio output of a piece of video equipment or PC. HDMI INPUT Adaptor BKM-FW15 You can enjoy enhanced or high-definition video, and two-channel digital audio. The appropriate mode for a piece of audio/video equipment or PC is automatically selected in accordance with the connected equipment. Note Be sure to use only an HDMI cable (not supplied) that bears the HDMI logo. HD-SDI/SDI INPUT Adaptor BKM-FW16 Connects to the HD-SDI signal output of a piece of video equipment. MONITOR CONTROL Adaptor BKM-FW21 1 CONTROL S IN/OUT (Mini jack): You can control pieces of multiple equipment with a single remote control when the display is connected to the CONTROL S connector of the video equipment or another display. Connect the CONTROL S OUT connector on this adaptor to the CONTROL S IN connector of the other equipment, and connect the CONTROL S IN connector on this adaptor to the CONTROL S OUT connector of the other equipment. 2 REMOTE (D-sub 9-pin): This connector allows remote control of the display using the RS-232C protocol. For details, contact your authorized Sony dealers. Notes • The REMOTE connector and the REMOTE (LAN) connector qs (page 11) on the side of the equipment cannot be used at the same time. • When using the REMOTE connector, select "Option" in "Network Port". (page 32) STREAMING RECEIVER Adaptor BKM-FW50 This adaptor enables you to use this display for digital signage. You can easily play back movies, still images or background music in designated data formats by just inserting a recording media. You can also use a network to view images from a remote computer on the display. Note A compact flash memory card is required. 18 GB