Sony GT630UI Owners Guide - Page 21

Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 7) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged. e Pull the release keys to unseat the unit. e Slide the unit out of the mounting. Main unit Back of the front panel Notes • For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. • Never touch the connectors directly with your fingers or with any metal device. Removing the unit 1 Remove the protection collar. e Detach the front panel (page 7). e Pinch both edges of the protection collar, then pull it out. 2 Remove the unit. e Insert both release keys simultaneously until they click. Hook facing inwards. Specifications AUDIO POWER SPECIFICATIONS CEA2006 Standard Power Output: 17 Watts RMS x 4 at 4 Ohms < 1% THD+N SN Ratio: 82 dBA (reference: I Watt into 4 Ohms) CD Player section Signal-to-noise ratio: 120 dB Frequency response: 10 - 20,000 Hz Wow and flutter: Below measurable limit Tuner section FM Thning range: 87.5 -107.9 MHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 150 kHz Usable sensitivity: 10 dBf Selectivity: 75 dB at 400 kHz Signal-to-noise ratio: 70 dB (mono) Separation: 40 dB at I kHz Frequency response: 20 - 15,000 Hz AM Thning range: 530 -1,710 kHz Antenna (aerial) terminal: External antenna (aerial) connector Intermediate frequency: 25 kHz Sensitivity: 26IJV USB Player section Interface: USB (Full-speed) Maximum current: 500mA Power amplifier section Output: Speaker outputs (sure seal connectors) Speaker impedance: 4 - 8 ohms Maximum power output: 52 W x 4 (at 4 ohms) - continue to next page --+ 21