Sony GT630UI Owners Guide - Page 24
Error displays/Messages - installation guide
UPC - 027242744394
View all Sony GT630UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Error displays/Messages OFFSET There may be an internal malfunction. CHECKING - Check the connection. If the error indication remains on in the display, consult your nearest The unit is confirming the connection of a USB device. Sony dealer. - Wait until confirming the connection is finished. ERROR*1 • The disc is dirty or inserted upside down. *2 -Clean or insert the disc correctly. OVERLOAD USB device is overloaded. - Disconnect the USB device, then change the source by pressing (SOURCE). • A blank disc has been inserted. • The disc cannot play due to a problem. - Indicates that the USB device is out of order, or an unsupported device is connected. - Insert another disc. • USB device was not automatically recognized. - Reconnect it again. • Press ~ to remove the disc. FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. READ The unit is reading all track and album information on the disc. - Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. - See the installation guide manual of this model to check the connection. FAILURE (Illuminates for about I second.) When the SAT tuner is connected, storing an SAT radio channel into a preset failed. RESET The CD unit, CD changer or USB device cannot be operated due to a problem. - Press the RESET button (page 6). - Be sure to receive the channel that you want to USB NO SUPRT (USB Not Support) store, then try it again. The connected USB device is not supported. HUB NO SUPRT -Connect a USB device of Mass Storage Class. USB hub is not supported on this unit. "I-. I-. I-. I-. " or LOAD The CD changer is loading the disc. - Wait until loading is complete. _ L.SEEK+/- During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any -further. "" The local seek mode is on during automatic tuning. The character cannot be displayed with the unit. NO DEV (No Device) ( SOURCE) is selected without a USB device connected. A USB device or a USB cable has been disconnected during playback. - Be sure to connect a USB device and USB cable. NO DISC The disc is not inserted in the CD changer. - Insert discs in the CD changer. NO MAG The disc magazine is not inserted in the CD changer. - Insert the disc magazine in the CD changer. * 1 If an error occurs during playback of a CD, the disc number of the CD does not appear in the display. *2 The disc number of the disc causing the error appears in the display. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began. NO MUSIC The disc or USB device does not contain a music file. - Insert a music CD in this unit or an MP3 playable CD changer. -Connect a USB device with a music file in it. NO NAME A disc/album/artist/track name is not written in the track. 24