Sony GVM-2000 Operating Instructions - Page 6
Sony GVM-2000 Manual
View all Sony GVM-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Location and Function of Parts and Controls Rear 14 16 11 - ml 00 O O 0 0 0 9 Te O 0, El LINE A To monitor the input signal fed through this line input, press the LINE A input select button on the front panel. VIDEO IN connector(BNC type) AUDIO IN jack(monaural)(phono type) Connect to the video and audio outputs of video equipment such as VCRs or video disc players. For a loop-through connection, connect to the video and audio outputs of another monitor. VIDEO OUT connector(BNC type) AUDIO OUT jack(monaural)(phono type) For a loop-through connection, connect to the video and audio inputs of another monitor. When a connecting cord is connected to the VIDEO OUT connector, the 75-ohm termination of the input is automatically released and the signal input to the VIDEO IN connector is output from this connector. 6 LINE B To monitor the input signal fed through this line input, press the LINE B input select button. Y/ C 750 termination switch When only the Y/C IN connector is connected (i.e. nothing is connected to the Y/C OUT connector), set this switch to ON. When both Y/C IN and OUT connectors are connected together for a loop-through connection, set this switch to OFF. Y/C IN connector(4-pin mini-DIN) Connect to the Y/C output of video equipment. VIDEO IN connector(BNC type) AUDIO IN jack(monaural)(phono type) Note When both the Y/C IN and VIDEO IN connectors are connected, the input signal fed through the VIDEO IN connector cannot be monitored. Y/C OUT connector(4-pin mini-DIN) For a loop-through connection, connect to the Y/C input of another monitor. VIDEO OUT connector(BNC type) AUDIO OUT jack(monaural)(phono type)