Sony HCD-BX5BT Operating Instructions - Page 31
Specifications, Main unit HCD-BX5BT/Compact Disc, Receiver, Amplifier Bluetooth - compact disc receiver
View all Sony HCD-BX5BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Specifications Main unit (HCD-BX5BT/Compact Disc Receiver) AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 120 10,000Hz; rated 12 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Continuous RMS power output (reference): 15 + 15 watts (6 ohms at 1 kHz, 10% THD) Inputs: AUDIO IN (stereo mini jack): voltage 250 mV, impedance 47 kilohms Outputs: PHONES (stereo mini jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 6 to 16 ohms Bluetooth section Communication system: Bluetooth Standard version 2.0 Output: Bluetooth Standard Power Class 2 Maximum communication range: Line of sight approx. 10 m1) Frequency band: 2.4 GHz band (2.4000 GHz 2.4835 GHz) Modulation method: FHSS Compatible Bluetooth profiles2): A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile) Supported codecs: Receive: SBC (Sub Band Codec), MP3 Transmit: SBC (Sub Band Codec) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna's performance, operating system, software application, etc. 2) Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. CD player section System: Compact disc and digital audio system Laser Diode Properties Emission duration: continuous Laser Output*: Less than 44.6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 90 dB Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section: Tuning range: 87.5 108.0 MHz (100 kHz step) Antenna: FM lead antenna Antenna terminals: 75 ohms unbalanced Intermediate frequency: 10.7 MHz AM tuner section: Tuning range: 530 1,710 kHz (with 10 kHz tuning interval) 531 1,710 kHz (with 9 kHz tuning interval) Antenna: AM loop antenna, external antenna terminal Intermediate frequency: 450 kHz Speaker (SS-CBX5) Speaker system: Full Range 10 cm, cone type Nominal impedance: 6 ohms Dimensions (w/h/d): Approx. 140 × 245 × 210 mm Mass: Approx. 1.9 kg net per speaker Continued 31GB Others