Sony HCD-EX5 Operating Instructions - Page 10

Playing a CD (continued) Other operations To Stop play Pause Select a track Find a point in a track Play repeatedly (Repeat Play) Remove the CD Do this Press x. Press NX (or X on the remote). Press again to resume play. During play or pause, press . or > repeatedly until you find the desired track. During play, press and hold down m or M and release it at the desired point. Press REPEAT on the remote repeatedly during play until "REPEAT" or "REPEAT1" appears. REPEAT: For all the tracks on the CD up to five times. REPEAT1: For a single track only. To cancel playing repeatedly, press REPEAT on the remote repeatedly until "REPEAT" and "REPEAT1" disappear. Press Z to remove the CD, then press Z again to close the cover inside the disc slot. To enter track number using the remote You can also select the desired track using the remote during Normal Play (no display). Press number buttons. Play automatically starts. To enter track number 10 or higher 1 Press >10. 2 Enter the corresponding digits. To enter 0, press 10/0 instead. Example: To enter track number 30, press >10, then 3 and 10/0. Programing CD tracks - Program Play You can make a program of up to 25 tracks on a CD in the order you want to play them. 1 Press FUNCTION repeatedly to switch the function to CD. 2 Press PLAY MODE on the remote in stop mode repeatedly until "PROGRAM" appears. 3 Press . or > repeatedly until the desired track number appears. Selected track Playing time of the number selected track 4 Press ENTER/YES on the remote. The track is programed. "Step" appears, followed by the order number of the track just programed. Then the last programed track number appears, followed by the total playing time of the program. If you made a mistake, you can clear the last programed track from the program by pressing CLEAR on the remote. Last programed Total playing track number time 5 To program additional tracks, repeat steps 3 and 4. 6 Press NX (or CD N on the remote). 10GB