Sony HCD-EX5 Operating Instructions - Page 7
Preparing the remote
View all Sony HCD-EX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started 3 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. AM antenna 4 Reinstall the rear cover. Pass the wires under the rear cover. AM loop antenna White Black FM antenna (Jack type A) Extend the FM wire antenna horizontally FM antenna (Jack type B) Extend the FM wire antenna horizontally 5 Connect the power cord to a wall outlet. If the plug does not fit the wall outlet, attach the supplied plug adapter (only for models equipped with an adapter). To turn on the system, press @/1. Note on the front glass The front glass is made of tempered glass. Under normal conditions, this tempered glass is more shock resistant and able to bear more weight than ordinary glass. This glass, however, may shatter if it receives a sharp blow or if it is scratched. Note Depending on the connected cords or antennas, you may not be able to reinstall the rear cover. Preparing the remote Pull out the insulating sheet to allow power to flow from the battery. The remote already contains a battery. FM antenna (Jack type C) Extend the FM wire antenna horizontally 7GB