Sony HCD-FR10W Operating Instructions - Page 13
Getting Started, Unpacking, Inserting Batteries into the Remote
View all Sony HCD-FR10W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started Getting Started Unpacking Check that you have the following items: • Speakers (5) • Subwoofer (1) • IR transmittera) (1) • IR receivera) b) (1) • IR receiver standb) (1) • AM loop antenna (aerial) (1) • FM wire antenna (aerial) (1) • Speaker cords (3.5m × 3, 10m × 1) (12ft. × 3, 34ft. × 1) • Video cord (1) • Remote Commander (remote) RM-SP350 (1) • Size AAA (R03) batteries (2) • Operating Instructions • Speakers - Connection and Installation (card) (1) a) The cords of the IR transmitter and IR receiver are for this system only. You cannot use a commercially available extension cord. b) Used when the IR receiver of the surround speaker (L) cannot receive infrared ray because of the position. For details, see "Using the IR receiver" (page 30). Inserting Batteries into the Remote You can control the system using the supplied remote. Insert two size AAA (R03) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the system. Remove the cover. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with an old one. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction. • If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. 13US