Sony HCD-FR10W Operating Instructions - Page 75
Using the SONY TV DIRECT Function
View all Sony HCD-FR10W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Other Operations Using the SONY TV DIRECT Function SONY TV DIRECT allows you to turn on your SONY TV and this system, change the system mode to "DVD," and then switch the TV's input source you set with one button push. SONY TV DIRECT TV/VIDEO Number buttons TV button TV CH + With cover opened. Preparation Register the TV's input source connected to this system. Press and hold TV/VIDEO while entering the code for the TV's input source to connect this system (see table below) using the number buttons. TV's input source is selected. If you successfully set the TV's input source code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes five times quickly. By pressing Number TV/VIDEO 0 1 2 3 4 5 6 7* 8* TV's input source No input source (Default) VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 VIDEO6 COMPONENT1 INPUT COMPONENT2 INPUT * Except for North American models. Operation Point the remote to the direction of TV and this system, then press SONY TV DIRECT once. While transmitting the code from the remote, the TV button flashes. If this function does not work, change the transmit time. The transmit time varies depending on the TV. To change the transmit time Press and hold TV CH + while entering the code for transmit time (see table below) using the number buttons. The transmit time from the remote is selected. If you successfully set the transmit time code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes five times quickly. By pressing Number TV CH+ 1 2 3 4 5 6 7 8 Transmit time 0.5 (Default) 1 1.5 2 2.5 3 3.5 4 continued 75US