Sony HCD-FR10W Operating Instructions - Page 17
continued, an incandescent lamp.
View all Sony HCD-FR10W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started Note on placing speakers • Do not set the speakers in an inclined position. • Do not place the speakers in locations that are: - Extremely hot or cold - Dusty or dirty - Very humid - Subject to vibrations - Subject to direct sunlight • Use caution when placing the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • Do not lean or hang on the speaker, as the speaker may fall down. Notes on placing IR transmitter and surround speaker (L) (or IR receiver) • Do not install the surround speaker (L) (or IR receiver) in a place exposed to direct sunlight or strong light such as an incandescent lamp. • The cords of the IR transmitter and IR receiver are for this system only. You cannot use a commercially available extension cord. Tip for the surround speaker (L) You can swap the surround speaker (L) and (R) positions, depending on the wall outlet and speaker layout (page 27). Tip Connect the speaker cable after bending the speaker wire at the end of the insulation. This prevents the speaker cable from being caught in the SPEAKER jack. continued 17US