Sony HCD-HP7 Operating Instructions - Page 13

Tuner Tuner Presetting radio stations You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. Automatic tuning preset You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations. 1 Press TUNER BAND repeatedly to select "FM" or "AM". 2 Press and hold TUNING +/- until the frequency indication starts to change, then release it. The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, "TUNED" and "STEREO" (for an FM stereo program) appear. If "TUNED" does not appear and the scanning does not stop Set the frequency of the desired radio station as described in steps 2 through 6 of "Manual tuning preset" (page 13). 3 Press TUNER MEMORY on the remote. A preset number appears. Preset number 6 Repeat steps 1 through 5 to store other stations. Manual tuning preset You can manually tune in and store the radio frequency of the desired stations. 1 Press TUNER BAND repeatedly to select "FM" or "AM". 2 Press TUNING +/- repeatedly to tune in the desired station. 3 Press TUNER MEMORY on the remote. A preset number appears. 4 Press PRESET +/- repeatedly to select the desired preset number. 5 Press ENTER on the remote. 6 Repeat steps 1 through 5 to store other stations. Other Operations To Tune in a station with a weak signal Set another station to the existing preset number Do this Follow the procedure described in "Manual tuning preset" (page 13). Start over from step 1. After step 3, press PRESET +/- repeatedly to select the preset number you want to store the other station. 4 Press PRESET +/- repeatedly to select the desired preset number. 5 Press ENTER on the remote. continued 13GB