Sony HDR-CX300 Handycam® Handbook - Page 13
camcorder and the wall outlet wall socket., pushing the battery pack in the direction of the arrow
UPC - 027242788817
View all Sony HDR-CX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting started You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your camcorder. Notes You cannot attach any "InfoLITHIUM" battery pack other than the V series to your camcorder. 1 Turn off your camcorder by closing the LCD screen. 2 Attach the battery pack by aligning the battery terminals () and pushing the battery pack in the direction of the arrow () until it clicks. 3 Connect the AC Adaptor and the power cord (mains lead) to your camcorder and the wall outlet (wall socket). Align the mark on the DC plug with that on the DC IN jack. The /CHG (flash/charge) lamp lights up and charging starts. The /CHG (flash/charge) lamp turns off when the battery pack is fully charged. 4 When the battery is charged, disconnect the AC Adaptor from the DC IN jack of your camcorder. Tips See page 96 on recording and playing time. When your camcorder is on, you can check the approximate amount of remaining battery power with the remaining battery indicator at the upper left on the LCD screen. Charging time Approximate time (min.) required when you fully charge a fully discharged battery pack. Battery pack NP-FV50(supplied) NP-FV70 NP-FV100 Charging time 155 195 390 Times measured with the camcorder at 25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is recommended. US 13