Sony HDR-CX300 Handycam® Handbook - Page 75
STEADYSHOT, FLASH MODE, FLASH LEVEL, REDEYE REDUC Redeye, reduction
UPC - 027242788817
View all Sony HDR-CX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
STEADYSHOT You can compensate for camera shake. Set [ STEADYSHOT] to [OFF] ( ) when using a tripod (sold separately), then the image becomes natural. ON The SteadyShot function is used. OFF ( ) The SteadyShot function is not used. FLASH MODE You can select the flash setting when you record photos using the built-in flash, or an external flash (sold separately) that is compatible with your camcorder. AUTO Automatically flashes when there is insufficient ambient light. ON ( ) Always uses the flash regardless of the surrounding brightness. OFF ( ) Records without flash. Notes The recommended distance to the subject when using the built-in flash is approximately 0.3 to 1.5 m (11 7/8 to 59 1/8 in.). Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp. The /CHG (flash/charge) lamp (p. 12) flickers while charging the flash, and remains lit when the battery charge is complete. If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective. The built-in flash is not flashed when [CONVERSION LENS] (p. 71) is set to other than [OFF], you cannot also set [FLASH MODE]. The flash is not flashed in movie recording mode. FLASH LEVEL You can set this function when you record photos using the built-in flash, or an external flash (sold separately) that is compatible with your camcorder. HIGH ( ) Makes the flash level higher. NORMAL ( ) LOW ( ) Makes the flash level lower. REDEYE REDUC (Redeye reduction) You can set this function when you record photos using the built-in flash, or an external flash (sold separately) that is compatible with your camcorder. When you set [REDEYE REDUC] to [ON], then set [FLASH MODE] to [AUTO] or [ON], appears. You can prevent redeye by activating the pre-flash before the flash flashes. OFF Does not prevent redeye. ON ( ) Prevents redeye. Notes The redeye reduction may not produce the desired effect due to individual differences and other conditions. The redeye function does not work with automatic recording by [SMILE DETECTION]. US 75 Customizing your camcorder