Sony HDR-PJ670 Help Guide - Page 87
Connecting this product to more than one camera with, Multi Camera Control Multi Connection
View all Sony HDR-PJ670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
you want to connect to as the SSID of the camera. When using the Multi Camera Control Function on this product, this product should only be connected to the camera you want to connect to via Wi-Fi and not other Wi-Fi access points. If you choose to connect this product to other Wi-Fi access points, then you do so at your own risk. This product may be subject to unauthorized access and any content communicated may be at risk of interception. [77] How to Use Using the Wi-Fi function Controlling other cameras through this product Connecting this product to more than one camera with Multi Camera Control (Multi Connection) You can connect this product with other cameras via Wi-Fi. By connecting via Wi-Fi, you can control other cameras with this product. 1. Turn on the power of the cameras you want to connect and set them in a state ready for Wi-Fi connection. For details on the operation, refer to the instructions manual of the cameras. 2. Turn on this product, then select Set] - [Multi Connection]. - [Wireless] - [ Setting] - [Multi Camera Ctrl 3. Select - [Wireless] - [ Function] - [Multi Camera Control]. 4. Select . 5. Select [Connect Device Reg]. This product enters registration waiting status (registration waiting status ends in about 2 minutes). 6. Perform connecting operation on the camera you want to connect with this product. For details on the Wi-Fi connection, refer to the instruction manuals of the cameras. 7. Select [OK] when it is displayed on the screen of the product to finish the registration. 8. Repeat steps 4 to 7 for each camera you want to connect. Note A maximum of five cameras (compatible with Multi Camera Control) can be registered to