Sony HT-CT390 Operating Instructions - Page 26
Subwoofer wireless sound, Remote control, Switch the TV, Blu-ray Disc player - bluetooth not working
View all Sony HT-CT390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
If a device that generates electromagnetic radiation, such as a wireless LAN equipment, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this system. Remove any obstacle between this system and the BLUETOOTH device or move this system away from the obstacle. Reposition the connected BLUETOOTH device. Try changing the wireless frequency of the Wi-Fi router, computer, etc. to 5 GHz band. Increase the volume on the connected BLUETOOTH device. The sound is not in sync with the image. When you are watching movies, you may hear the sound with a slight delay from the image. Subwoofer wireless sound No sound is heard from the subwoofer. The power indicator does not light up. • Check that the AC power cord (mains lead) of the subwoofer is connected properly. • Press on the subwoofer to turn on the power. The power indicator flashes slowly in green or lights up in red. • Move the subwoofer to a location near the Bar Speaker so that the power indicator lights up in green. • Follow the steps in "Activating wireless transmission between specific units (Secure Link)" (page 21). If the power indicator flashes in red, press on the subwoofer to turn off the power and check whether the ventilation opening of the subwoofer is blocked or not. The subwoofer is designed for playback of bass sound. When the input source does not contain much of bass sound, as is the case with most TV programs, the bass sound may not be audible. Press SW + to increase the volume of the subwoofer (page 22). Sound skips or has noise. If there is a device nearby that generates electromagnetic waves like a wireless LAN or a microwave oven in use, locate the system apart from it. If there is an obstacle between the Bar Speaker and the subwoofer, move or remove it. Locate the Bar Speaker and the subwoofer as close as possible. Switch the wireless LAN frequency of any nearby Wi-Fi router or personal computer to 5 GHz band. Switch the TV, Blu-ray Disc player, etc. from wireless LAN to wired LAN. Remote control The remote control does not function. Point the remote control at the remote control sensor on the Bar Speaker (page 7). Remove any obstacles in the path between the remote control and the Bar Speaker. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control. The TV remote control does not work. Install the Bar Speaker so that it does not obstruct the remote control sensor of the TV. 26US