Sony HT-CT390 Operating Instructions - Page 29
Wireless transmitter, receiver Subwoofer SA-WCT390 - bluetooth pairing
View all Sony HT-CT390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Additional Information Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible BLUETOOTH profiles2) A2DP 1.2 (Advanced Audio Distribution Profile) AVRCP 1.6 (Audio Video Remote Control Profile) Supported Codecs3) SBC4), AAC5) Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 32 kHz, 44.1 kHz, 48 kHz) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. 2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices. 3) Codec: Audio signal compression and conversion format 4) Subband Codec 5) Advanced Audio Coding Front L/Front R speaker section Speaker system Full range speaker system, Acoustic suspension Speaker 60 mm (2 3/8 in) cone type General Power requirements 120 V AC, 60 Hz Power consumption On: 45 W Standby: 0.5 W or less (Power saving mode) (When "CTRL" in "HDMI>" and "BTSTB" in "BT >" are set to "OFF") Standby: 2.8 W or less6) (When "CTRL" in "HDMI>" or "BTSTB" in "BT >" is set to "ON") Dimensions (w/h/d) (approx.) 900 mm × 52 mm × 121 mm (35 1/2 in × 2 1/8 in × 4 7/8 in) (without wall mounting brackets) 900 mm × 121 mm × 59 mm (35 1/2 in × 4 7/8 in × 2 3/8 in) (with wall mounting brackets) Mass (approx.) 2.2 kg (4 lb 14 oz) 6)The system will automatically enter Power saving mode when there is no HDMI connection and no BLUETOOTH pairing history, regardless of the settings you have made for "CTRL" in "HDMI>" and "BTSTB" in "BT >". Subwoofer (SA-WCT390) POWER OUTPUT (reference) 100 W (per channel at 4 ohms, 100 Hz) Speaker system Subwoofer system, Bass reflex Speaker 130 mm (5 1/4 in) cone type Power requirements 120 V AC, 60 Hz Power consumption On: 20 W Standby: 0.5 W or less Dimensions (w/h/d) (approx.) 170 mm × 342 mm × 362 mm (6 3/4 in × 13 1/2 in × 14 3/8 in) (vertical installation) 342 mm × 172 mm × 362 mm (13 1/2 in × 6 7/8 in × 14 3/8 in) (horizontal installation) Mass (approx.) 6.5 kg (14 Ib 6 oz) Wireless transmitter/ receiver section Frequency band 2.4 GHz (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Design and specifications are subject to change without notice. 29US