Sony HT-M5 Operating Instructions - Page 37
Recording using the receiver
View all Sony HT-M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Basic Operations Note Character or marks may not be displayed for some languages. Recording using the receiver You can record from an audio/video equipment using the receiver. Refer to the operating instructions supplied with your recording equipment. 1 Prepare the source for playing. Press the input button to select the source. You can also use INPUT SELECTOR on the receiver. Example 1 (audio recording): Press SA-CD/CD. Example 2 (video recording - HT-M7/ HT-M5 only): Press SAT/CATV. 2 Prepare the recording equipment. Insert a blank video tape, etc. into the recording equipment (connected to VIDEO OUT jacks). 3 Start recording on the recording equipment, then start the playback equipment. Notes • Some sources contain copyright protection to prevent recording. In this case, you may not be able to record from the source. • While the source is being recorded, the auto standby function of the receiver may start up and interrupt the recording. In this case, set the "AUTO.STBY" to "STBY OFF" (page 52). • (HT-M7/HT-M5 only) Audio input signals via HDMI IN, DIGITAL IN and COMPONENT VIDEO IN jacks cannot be recorded. • (HT-M3 only) - You can only record audio signals using this receiver. - Audio input signals via HDMI IN and DIGITAL IN jacks cannot be recorded. 37US