Sony HT-M5 Operating Instructions - Page 54
Sound, Deep Colour or 3D transmission.
View all Sony HT-M5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
• Make sure that cables are correctly and securely connected to equipment. • Depending on the playback equipment, you may need to set up the equipment. Refer to the operating instructions supplied with each equipment. • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for the 1080p, Deep Color (Deep Colour) or 3D transmission. No 3D image appears on the TV. • Depending on the TV or the video equipment, 3D images may not be displayed. When the receiver is in standby mode, there is no image output from the TV. • When the receiver enters into standby mode, image are from the last HDMI equipment selection before you turned off the receiver. If you are enjoying other equipment, play the equipment and perform the One-Touch Play operation, or turn on the receiver to select the HDMI equipment you want to enjoy. • Make sure "PASS.THRU" is set to "ON" in the HDMI menu if you connect equipment not compatible with the "BRAVIA" Sync to the receiver (page 51). Recording cannot be carried out. • Check that the equipment are connected correctly. • Select the source equipment using the input buttons (page 32). • Video input signals via HDMI IN and COMPONENT VIDEO IN (HT-M7/ HT-M5 only) jacks cannot be recorded. • Copyright protection to prevent recording is contained in the sources. In this case, you may not be able to record from the sources. Sound There is no sound, no matter which equipment is selected, or only a very low-level sound is heard. • Check that all connecting cords are inserted to their input/output jacks for the respective jacks of the receiver, speakers and the equipment. • Check that both the receiver and all equipment are turned on. • Check that MASTER VOLUME is not set to "VOL MIN". • Press MUTING on the remote control to cancel the muting function. • Try pressing the input button on the remote control or turning INPUT SELECTOR on the receiver to select the equipment of your choice (page 32). • When you want to listen to the sound from the TV speaker, set the "AUDIO.OUT" to "TV+AMP" in the HDMI menu (page 51). If you cannot play back multi channel audio source, set to "AMP". However, the sound will not output through the TV speaker. • Sound may be interrupted when the sampling frequency, the number of channels or audio format of audio output signals from the playback equipment is switched. There is severe hum or noise. • Check that the speakers and equipment are connected securely. • Check that the connecting cords are away from a transformer or motor, and at least 3 meters (10 feet) away from a TV set or fluorescent light. • Move your audio equipment away from the TV. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. 54US