Sony HT-MT300 Operating Instructions - Page 25
Enjoying Multiplex Broadcast Sound (AUDIO), Saving Power Consumption, Turn the System Off
View all Sony HT-MT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Enjoying Multiplex Saving Power Broadcast Sound (AUDIO) Consumption You can enjoy multiplex broadcast sound when the system receives a Dolby Digital multiplex broadcast signal. To use the system while saving power consumption, change the following settings. AUDIO Turn the System Off by Detecting the Using State When you set the auto standby function to on, the system enters standby mode automatically when you do not operate the system for about 20 minutes and the system is not receiving an input signal. Using the Various Functions Press AUDIO repeatedly. The channel changes cyclically as follows. Main Sub Main/Sub Main Outputs only the main channel. The MOVIE and MUSIC indicators flash twice. Sub Outputs only the sub channel. The MOVIE indicator flashes twice. Main/Sub Main sound is output from the left speaker and sub sound is output from the right speaker. The MUSIC indicator flashes twice. Note To receive a Dolby Digital signal, you need to connect a TV or other devices to the TV IN (OPTICAL) jack with the optical digital cable (supplied). MOVIE/MUSIC Hold down MOVIE/MUSIC for 5 seconds to set the function to on or off. Auto standby on The USB and ANALOG indicators flash twice. Auto standby off The USB indicator flashes twice. Saving Power in Standby Mode To save power consumption during the standby mode, set the BLUETOOTH standby mode to off (page 23). The default setting is on. 25US