Sony HT-MT300 Operating Instructions - Page 29
Mobile Device Connection, Remote Control, The sound is not in sync with
View all Sony HT-MT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Troubleshooting Mobile Device Connection BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator on the main unit is lit (page 7). Make sure the BLUETOOTH device to be connected is turned on and the BLUETOOTH function is enabled. Bring this system and the BLUETOOTH device closer together. Pair this system and the BLUETOOTH device again. You may need to cancel the pairing with this system using your BLUETOOTH device first. Pairing cannot be achieved. Bring this system and the BLUETOOTH device closer together. Make sure this system is not receiving interference from a wireless LAN device, other 2.4GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this system. Pairing may not be possible if other BLUETOOTH devices are present around the system. In this case, turn off the other BLUETOOTH devices. Sound of the connected BLUETOOTH mobile device is not output from the system. Make sure that the BLUETOOTH indicator on the main unit is lit (page 7). Bring this system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this system. Remove any obstacle between this system and the BLUETOOTH device or move this system away from the obstacle. Reposition the connected BLUETOOTH device. Switch the wireless LAN frequency of any nearby wireless LAN router or PC to 5 GHz range. Increase the volume on the connected BLUETOOTH device. The sound is not in sync with the image. When you are watching movies, you may hear the sound with a slight delay from the image. Remote Control The remote control of this system does not function. Point the remote control at the remote control sensor on the main unit (page 7). Remove any obstacles in the path between the remote control and the system. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control (page 12). The TV remote control does not work. Install the main unit so that it does not obstruct the remote control sensor of the TV. 29US