Sony HT-S200F Operating Instructions - Page 16
Mounting the Bar Speaker on a Wall, About operations with the, remote control that is supplied
View all Sony HT-S200F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3 Adjust the volume of the system by using the TV remote control. When pressing the mute button on the TV remote control, the sound is muted temporarily. Tip When the TV is turned off, the system is also turned off by interlocking with the TV power. About operations with the remote control that is supplied with the system You can use the following buttons. You can adjust the level of the bass tone and sound quality in addition to turning the system on/off and adjusting volume that can be operated by the TV remote control. STANDARD AUTO SOUND MUSIC CINEMA NIGHT VOICE +/- BASS Mounting the Bar Speaker on a Wall You can mount the Bar Speaker on a wall. Notes • Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely in the wall beam. Install the speakers horizontally, hung by screws in studs in a continuous flat section of the wall. • Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation. • Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural disaster, etc. Note If you select the USB input on the remote control supplied with the system, the TV sound is not output from the system. To output the TV sound, press INPUT on the remote control to select the TV input. 16US