Sony HT-S200F Operating Instructions - Page 29
Notes on HDMI Connections, Saving Power Consumption, Turn the System Off by, Detecting the Using State
View all Sony HT-S200F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Notes on HDMI Connections • Use an HDMI-authorized cable. • We recommend using a Sony High Speed HDMI Cable with Ethernet with the Cable Type Logo. • We do not recommend using an HDMI-DVI conversion cable. • Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected device. Saving Power Consumption To use the system while saving power consumption, change the following settings. Turn the System Off by Detecting the Using State When you set the auto standby function to on, the system enters standby mode automatically when you do not operate the system for about 20 minutes and the system is not receiving an input signal. Press and hold CINEMA for 5 seconds to set the function to on or off. Auto standby on The USB indicator flashes twice. Auto standby off The USB indicator flashes once. Saving Power in Standby Mode To save power consumption during the standby mode, set the BLUETOOTH standby mode (page 26) and Control for HDMI function (page 27) to off. The default settings for them are on. 29US