Sony ILCE-7M2 Instruction Manual - Page 22
Bottom view, Connection plate cover
![]() |
View all Sony ILCE-7M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Bottom view Identifying parts A Battery insertion slot (48) B Battery cover (48) C Tripod socket hole • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. D Battery cover locking button E Battery cover release lever • When you attach a vertical grip (sold separately), remove the battery cover. Connection plate cover Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below. • Make sure that the cord is not pinched when you close the cover. GB 22
![](/manual_guide/products/sony-ilce7m2-instruction-manual-8ca9f57/22.png)
Identifying parts
GB
22
A
Battery insertion slot (48)
B
Battery cover (48)
C
Tripod socket hole
•
Use a tripod with a screw less
than 5.5 mm (7/32 inches) long.
Otherwise, you cannot firmly
secure the camera, and damage
to the camera may occur.
D
Battery cover locking button
E
Battery cover release lever
•
When you attach a vertical grip
(sold separately), remove the
battery cover.
Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately).
Insert the connection plate into the
battery compartment, and then pass
the cord through the connection
plate cover as shown below.
•
Make sure that the cord is not
pinched when you close the
cover.
Bottom view