Sony KDL-40Z5100 Operating Instructions - Page 10
Connecting the TV, Cable System or VHF/UHF Antenna System, Cable/Antenna, Cable, Antenna - picture in picture
UPC - 027242756878
View all Sony KDL-40Z5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting the TV Cable System or VHF/UHF Antenna System You can enjoy high-definition and standard-definition digital programming (if available in your area) along with standard-definition analog programming. This TV is capable of receiving unscrambled digital programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC). Cable or VHF/UHF (or VHF only) 75-ohm coaxial cable Rear of TV CABLE/ANTENNA • It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can easily be affected by radio frequency interference, resulting in signal degradation. Cable System and VHF/UHF Antenna System Use an optional A-B RF switch (not A-B RF Switch supplied) to switch between the cable and over-the-air antenna programming, Cable A as shown here. Antenna B Set the Cable/Antenna setting found Rear of TV CABLE/ANTENNA under the Settings on the XMB™ to Cable or Antenna for the type of input signal you choose. HD Cable Box/HD Satellite Box You can enjoy high-definition programming by subscribing to a high-definition service or a highdefinition satellite service. For the best possible picture, make sure you connect this equipment to your TV via the HDMI or component video (with audio) input located on the back of your TV. Shown with HDMI Connection Rear of TV CATV/Satellite antenna cable HD cable box/ HD satellite box HDMI cable 10