Sony KDL-40Z5100 Operating Instructions - Page 46

Specifications, Model, KDL-40Z5100, System, Input/Output jacks, Power and others - 1080p lcd tv

Page 46 highlights

Specifications Model KDL-40Z5100 KDL-46Z5100 KDL-52Z5100 System Television system NTSC: American TV standard ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality) Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69 Analog Cable: 1 - 135 / Digital Cable: 1 - 135 Panel system LCD (Liquid Crystal Display) Panel Speaker output Input/Output jacks 10 W + 10 W CABLE/ANTENNA 75-ohm external terminal for RF inputs VIDEO IN 1/2 S VIDEO (4-pin mini DIN) (VIDEO 2 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / C: 0.286 Vp-p (Burst signal), 75 ohms VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms COMPONENT IN 1/2 YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB: 0.7 Vp-p, 75 ohms / PR: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits, Dolby Digital AUDIO (HDMI IN 1 only): 500 mVrms (Typical) / Impedance: 47 kilohms AUDIO OUT 500 mVrms (typical) DIGITAL AUDIO OUT (OPTICAL) PCM/Dolby Digital optical signal PC IN D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive See the PC Input Signal Reference Chart on page 12. PC AUDIO INPUT Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms USB MPEG2, MP3, and JPEG. DLNA Power and others MPEG2, LPCM, MP3, and JPEG. Power requirement 120-240 V AC, 50/60 Hz Power consumption in use 205 W 240 W 300 W in DAM* All models less than 20 W (You may hear a clicking noise during the download but this is normal.) in standby All models less than 0.1 W with 120 V AC and with 240 V AC less than 0.3 W Screen size (inches measured diagonally) 40 46 52 Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical) Speaker/Full range (2) (mm) (inches) 34 × 160 1 3/8 × 6 1/4 45 × 200 1 3/4 × 7 7/8 Dimensions with stand (mm) (inches) 961 × 662 × 303 37 7/8 × 26 1/8 × 12 1,094 × 743 × 330 43 1/8 × 29 3/8 × 13 1,244 × 841 × 358 49 × 33 1/8 × 14 1/8 without stand (mm) (inches) 961 × 614 × 79 37 7/8 × 24 1/4 × 3 1/8 1,094 × 695 × 85 43 1/8 × 27 3/8 × 3 3/8 1,244 × 783 × 85 49 × 30 7/8 × 3 3/8 wall-mount hole pattern (mm) 300 × 300 wall-mount screw size (mm) M6 (length: refer to diagram on page 7) Mass with stand (kg) 19.6 24.0 30.1 (lb.) 43.2 52.9 66.3 without stand (kg) 16.9 20.7 26.1 (lb.) 37.3 45.6 57.5 Supplied accessories Remote control RM-YD029 (1) / AC power cord (1) / Size AA batteries (2) / Cable clamper (1 attached to the Table-Top Stand) / Operating Instruction Manual (1) / Quick Setup Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) / Attaching the Table-Top Stand (1) / Screws (4) (except KDL-52Z5100) Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket: see page 45 * Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen. ~ • Optional accessories availability depends on its stock. • Design and specifications are subject to change without notice. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

46
Specifications
* Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen.
~
Optional accessories availability depends on its stock.
Design and specifications are subject to change without notice.
Model
KDL-40Z5100
KDL-46Z5100
KDL-52Z5100
System
Television system
NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage
Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system
LCD (Liquid Crystal Display) Panel
Speaker output
10 W + 10 W
Input/Output jacks
CABLE/ANTENNA
75-ohm external terminal for RF inputs
VIDEO IN 1/2
S VIDEO (4-pin mini DIN) (VIDEO 2 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative /
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
COMPONENT IN 1/2
YP
B
P
R
(Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / P
B
: 0.7 Vp-p, 75 ohms /
P
R
: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
HDMI IN 1/2/3/4
HDMI:
Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p
Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits, Dolby Digital
AUDIO (HDMI IN 1 only): 500 mVrms (Typical) / Impedance: 47 kilohms
AUDIO OUT
500 mVrms (typical)
DIGITAL AUDIO OUT
(OPTICAL)
PCM/Dolby Digital optical signal
PC IN
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal Reference Chart on page 12.
PC AUDIO INPUT
Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms
USB
MPEG2, MP3, and JPEG.
DLNA
MPEG2, LPCM, MP3, and JPEG.
Power and others
Power requirement
120-240 V AC, 50/60 Hz
Power consumption
205 W
240 W
300 W
in use
in DAM*
All models less than 20 W (You may hear a clicking noise during the download but this is normal.)
in standby
All models less than 0.1 W with 120 V AC and with 240 V AC less than 0.3 W
Screen size
(inches measured diagonally)
40
46
52
Display resolution
1,920 dots (horizontal) × 1,080 lines (vertical)
Speaker/Full range (2) (mm)
(inches)
34
×
160
1
3
/
8
×
6
1
/
4
45
×
200
1
3
/
4
×
7
7
/
8
Dimensions
with stand (mm)
(inches)
961
×
662
×
303
37
7
/
8
×
26
1
/
8
×
12
1,094
×
743
×
330
43
1
/
8
×
29
3
/
8
×
13
1,244
×
841
×
358
49
×
33
1
/
8
×
14
1
/
8
without stand (mm)
(inches)
961
×
614
×
79
37
7
/
8
×
24
1
/
4
×
3
1
/
8
1,094
×
695
×
85
43
1
/
8
×
27
3
/
8
×
3
3
/
8
1,244
×
783
×
85
49
×
30
7
/
8
×
3
3
/
8
wall-mount hole pattern (mm)
300 × 300
wall-mount screw size (mm)
M6
(length: refer to diagram on page 7)
Mass
with stand (kg)
(lb.)
19.6
43.2
24.0
52.9
30.1
66.3
without stand (kg)
(lb.)
16.9
37.3
20.7
45.6
26.1
57.5
Supplied accessories
Remote control RM-YD029 (1) / AC power cord (1) / Size AA batteries (2) / Cable clamper
(1 attached to the Table-Top Stand) / Operating Instruction Manual (1) / Quick Setup Guide (1) /
Warranty Card (1) / Safety and Regulatory Booklet (1) / Attaching the Table-Top Stand (1) /
Screws (4) (except KDL-52Z5100)
Optional accessories
Connecting cables / Support Belt Kit / Wall-Mount Bracket: see page 45