Sony KLV-23M1 Operating Instructions - Page 27
Connecting a Satellite Receiver
View all Sony KLV-23M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting and Setting the TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Using A/V and S VIDEO cables, connect the satellite receiver's AUDIO and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks (VIDEO 1 IN or VIDEO 2 IN). Tip If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. 3 Connect the supplied 75-ohm coaxial cable from your cable box or antenna to the TV's VHF/UHF jack. VHF/UHF 1 S VIDEO Satellite Receiver Satellite antenna cable S VIDEO cable (not supplied) 75-ohm coaxial cable (supplied) S VIDEO VIDEO (yellow) AUDIO-L (white) Rear of TV VIDEO IN VIDEO L AUDIO R (MONO) AUDIO-R (red) A/V cable (not supplied) Note When you connect video equipment to both the VIDEO and the S VIDEO input jacks, make sure "Auto YC" in the (Setup) menu is set to "On" to view the S VIDEO input (see page 26). Tip Use VIDEO 1/2 on the remote control to select VIDEO 1 IN (or VIDEO 2 IN if you use the VIDEO 2 IN jacks for this hookup) to watch satellite TV. 27