Sony KLV-23M1 Operating Instructions - Page 30
Connecting a DVD Player with Component Video Connectors
![]() |
View all Sony KLV-23M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Connecting a DVD Player with Component Video Connectors Rear of TV Use this hookup if: • Your DVD player has component (Y, PB, PR) jacks. Tips • The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors. • To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player. Disconnect all power sources before making any connections. 1 Using a component video cable, connect the DVD player's Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD 3 IN connections. 2 Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to the TV's AUDIO IN jacks. Note The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. Tip Use VIDEO 3 on the remote control to select HD/DVD 3 IN to watch the DVD player input. AUDIO OUT(VAR/FIX) R AUDIO L Y (1080i / 720p / 480p / 480i) PB PR Y PB Component video cable (not supplied) PR AUDIO cable (not supplied) AUDIO-L (white) AUDIO-R (red) R AUDIO L HD/DVD IN 3 DVD Player 30
![](/manual_guide/products/sony-klv23m1-operating-instructions-52f1285/30.png)