Sony KV-20TS27 Operating Instructions - Page 20

Other Useful Features NG *s "n" int5 C5M Min CIL' nun'MM c±H±H±M ±1±1,23 Tie]Elli Cm1 I i I ITTRI:. C . MUTING SLEEP MTS JUMP DISPLAY VOL +/- \ RM-783 Muting the sound - MUTING button 1. Press MUTING. 2. The display "MUTING" will appear on the screen. 3. To restore the sound, press MUTING again, or press VOL +. Using the SLEEP timer - SLEEP button TO SET: (Turns TV off automatically about 1 hour after setting) 1. Press SLEEP. 2. A green "SLEEP ON" display appears for a few seconds. 3. A red "SLEEP" display will appear 1 minute before the TV shuts off. TO CANCEL: Press SLEEP again. A green "SLEEP OFF" display appears for a few seconds. OR Turn the TV off. The sleep timer setting will be cancelled. Receiving a Multichannel TV Sound Program - MTS button (KV-20TS27, KV-20TS28, KV-2137RS and KV-21STR1 only) Each time you press MTS, the MAIN, SAP (Second Audio Program) and MONO modes are selected in sequence. The display (in green) for each mode will appear on the screen for a few seconds. (NOTE: During SAP mode, the sound of non-SAP programs will be muted.) TO LISTEN TO STEREO SOUND: 1. Press MTS to select the MAIN mode. 2. The MAIN display will appear on screen. 3. The STEREO indicator lamp on the TV will light up whenever a stereo broadcast is received. NOTE: A weak incoming signal may cause excessive noise with some stereo broadcasts. Switch to MONO mode to eliminate this noise. Switching quickly between 2 channels JUMP button JUMP L 11 c J Each time you press the JUMP button, the channel which appeared on the screen immediately before is recalled. Use this feature to keep track of two programs alternately. Keeping the channel displayed - DISPLAY button DISPLAY TO DISPLAY the channel: Press DISPLAY. The channel display will remain on the screen. TO CANCEL the display: Press DISPLAY again. The channel display will disappear. 20