Sony KV-24FS120 Operating Instructions - Page 41
Other Information - 4 flashes
View all Sony KV-24FS120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Other Information Troubleshooting If you have a problem with your TV, try the suggestions below. If the problem persists, see "Contacting Sony" at the end of this section. General Problem Possible Remedies I want to reset the TV ❏ to the factory settings Turn on the TV. While holding down the RESET button on the remote control, press POWER button on the TV front panel. The TV will turn itself off, then back on again. Release the RESET button. The TV is dirty ❏ Clean the TV with a soft dry cloth. Never use strong solvents such as thinner or benzine, which might damage the finish of the cabinet. I lost the parental control password ❏ In the password screen, enter the following master password: 4357. After using the master password, you must create a new password. You cannot use the master to unlock currently blocked channels. There is a black box on the screen ❏ You have selected a text option in the Setup menu (page 31) and no text is available. To turn off this feature, select Off in the Caption Vision option. If you were trying to select closed captioning, select CC1-4 instead of Text1-4. There was a blackout ❏ or power outage, and now the TV won't turn on and the timer LED is flashing Press the POWER button on your remote control or on the TV front panel. Digital cable box does not work ❏ Be sure that you have not connected the digital cable box to the TV's jack. This jack is not compatible with digital cable boxes. ❏ If you are connecting a VCR and digital cable box using a splitter, as described in pages 9, you must use a special bidirectional splitter that is designed to work with your digital cable box. Other Information 33