Sony LBT-W900AV Operating Instructions - Page 10

Step 4: Presetting radio stations You can preset the following number of stations: - 2 band model: 20 for FM and 10 for AM - 3 band model: 20 for FM, 10 for AM, and 5 for UKV The bands you can select depend on the kind of tuner built into your system. Confirm the bands by pressing TUNER/BAND repeatedly. 1/u (Power) 4 2 51 3 2 Press TUNING MODE repeatedly until "AUTO" appears in the display. 3 Press TUNING +/-. The frequency indication changes and scanning stops when the system tunes in a station. "TUNED" and "STEREO" (for a stereo program) appear. 4 Press TUNER MEMORY. The next available preset number flashes in the display. The stations are stored from preset number 1. n 1 Press TUNER/BAND repeatedly until the desired band appears in the display. Each time you press this button, the band changes as follows: 2 band model: FM ˜ AM 3 band model: FM n AM n UKV* * When you select this band, "STEREO PLUS" appears in the display. 5 Press ENTER/NEXT. The station is stored. 6 Repeat steps 1 through 5 to store other stations. To tune in a station with a weak signal Press TUNING MODE repeatedly until "MANUAL" appears in step 2, then press TUNING +/- to tune in a station. To store another station on an existing preset number Start over from step 1. After step 4, press TUNING +/- to select the preset number on which you want to store the station. You can add a new preset number after the last preset number. 10