Sony LBT-W900AV Operating Instructions - Page 6

Step 1: Hooking up the system (continued) 3 If your system has a VOLTAGE SELECTOR on the rear panel, set it to the position of your local power line voltage. VOLTAGE SELECTOR Inserting two R6 (size AA) batteries into the remote ] } } ] 120V 230 - 240V 4 Connect the power cord to a wall outlet. The demonstration appears in the display. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). 5 Deactivate the demonstration mode by pressing DISPLAY (for LBTW900AV/XB800AV only) or DEMO (STANDBY) (for other models) while the system is off. To attach the center speaker feet Attach the four center speaker feet (supplied) to the bottom corners of the center speaker. 220V Tips • With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. • When you set the time, the demonstration is deactivated. To activate the demonstration again, press DISPLAY (for LBT-W900AV/XB800AV only) or DEMO (STANDBY) (for other models) while the system is off. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until "CD" appears in the display. 2 Hold down LOOP and press 1/u to turn off the system. To connect optional AV components See page 44. 6