Sony LF-B20 Operating Instructions - Page 13
Setup 1: Attaching the Base Station Stand - base stations
UPC - 027242702974
View all Sony LF-B20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setup and Connections The POWER LED on the front panel of the Base Station lights green. Also, the SETUP MODE/ NET AV LED blinks green until an automatic NetAV check begins. Setup 1: Attaching the Base Station Stand WIRELESS NETWORK SETUP MODE/ NET AV SETUP MODE RESET 5 Check to see if the WIRELESS LED blinks green. 6 Install the LocationFree Player on your computer. To keep the Base Station stable, attach the Base Station stand. Note Place the Base Station at least 4 inches (10 cm) away from the wall. Insert the claws of the stand into the holes on the bottom of the Base Station until they click into place. The two claws differ in size. Fit each claws into the same sized hole. 7 Start the LocationFree Player to make the Holes wireless settings of the Base Station following the instructions of the screen of your computer. After making the wireless settings, restart your Base Station. 8 Check to see if the WIRELESS LED lights green, and then disconnect the LAN cable from the Base Station. Stand Claws 9 Check to see if the NETWORK LED lights green. If the NETWORK LED lights green, the connection to the wireless router is complete. Follow the instructions on the screen of your computer to connect to external devices and make settings of the LocationFree Player. 13