Sony MCC-1000MD Operating Instructions - Page 55

Appendices, Troubleshooting, Power, Shooting

Get Sony MCC-1000MD PDF manuals and user guides View all Sony MCC-1000MD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Appendices Troubleshooting Before you call for service, please check the problems and solutions described below. If you cannot solve the problem, contact the nearest authorized dealer. Power Symptom Cause The unit does not power on when you press the 1 (on/standby) switch. The unit is not connected to AC power. All of the LED A system error occurred. indicators on the front panel (except the power indicator) are blinking. Solution Connect AC Power. Remove the power cord and check the camera cable and connection with other devices. If the problem persists, contact Sony service representative. Shooting Symptom Cause Solution No picture is output from the camera. The camera head and CCU are not Check the connection with the camera head. securely connected. The [System] menu's [Region] option Correctly set the [System] menu's [Region] setting (see setting differs from your video page 50). monitor settings. You can also change the [Region] setting as follows. To set to [NTSC]: Press the LOCK button while holding down the MENU and V buttons. To set to [PAL]: Press the LOCK button while holding down the MENU and V buttons. The [System] menu's [SDI Video Format] option setting differs from your video monitor settings. Correctly set the [System] menu's [SDI Video Format] setting (see page 50). Camera picture output is distorted (does not display properly). The camera head and CCU are not securely connected. Check the camera cable connection. Insert the camera cable's connector fully, and turn the connector ring to secure it. 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
55
Before you call for service, please check the problems and solutions described below. If you cannot solve
the problem, contact the nearest authorized dealer.
Appendices
Troubleshooting
Power
Symptom
Cause
Solution
The unit does not
power on when
you press the
1
(on/standby)
switch.
The unit is not connected to AC
power.
Connect AC Power.
All of the LED
indicators on the
front panel (except
the power
indicator) are
blinking.
A system error occurred.
Remove the power cord and check the camera cable and
connection with other devices.
If the problem persists, contact Sony service representative.
Shooting
Symptom
Cause
Solution
No picture is
output from the
camera.
The camera head and CCU are not
securely connected.
Check the connection with the camera head.
The [System] menu’s [Region] option
setting differs from your video
monitor settings.
Correctly set the [System] menu’s [Region] setting
(see
page 50)
.
You can also change the [Region] setting as follows.
To set to [NTSC]: Press the
LOCK button while
holding down the MENU and
V
buttons.
To set to [PAL]: Press the
LOCK button while holding
down the MENU and
V
buttons.
The [System] menu’s [SDI Video
Format] option setting differs from
your video monitor settings.
Correctly set the [System] menu’s [SDI Video Format]
setting
(see page 50)
.
Camera picture
output is distorted
(does not display
properly).
The camera head and CCU are not
securely connected.
Check the camera cable connection. Insert the camera
cable’s connector fully, and turn the connector ring to
secure it.