Sony MDR-RF5000K Operating Instructions - Page 15

Setting the input level If the volume is low using the analog input, set the ATT (attenuator) switch to "0 dB." ATT 0dB -8dB Setting Connected components 0 dB -8 dB TV, portable components, and other components with a low output level Other components (initial settings) Notes • Be sure to lower the volume before setting the ATT switch. • If audio input to the LINE IN jacks is distorted (sometimes, noise can be heard at the same time), set the ATT switch to "-8 dB." Connecting the transmitter to digital components Use the sold separately optical digital connecting cable to connect the optical digital output jack on a CD/DVD device, digital satellite/TV receiver, or other digital component to the DIGITAL IN jack (black) of the transmitter. Optical digital output of a connected AV component should be set to PCM. Read their operating instructions of the connected device. When connecting the transmitter to an AV amplifier, etc., connect the DIGITAL OUT jack (Red) and external optical digital input jack using the optical digital connecting cable (sold separately). Transmitter To DIGITAL OUT jack (Red) To optical digital input jack Optical digital connecting cable (sold separately) Equipment with optical digital input terminal such as an AV amplifier To DIGITAL IN jack (Black) To optical digital output jack Optical digital connecting cable (sold separately) Match the orientation of the plug with the jack, and then insert until the plug fits into place. DVD device, digital satellite/TV receiver, or other digital component having an optical digital output jack (Continued) Connection 15US