Sony MDR-RF5000K Operating Instructions - Page 21
Using Additional Headphones
View all Sony MDR-RF5000K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Using Additional Headphones In this system, by using additional MDR-RF5000 wireless headphones (sold separately), more than one person can enjoy the surround sound experience wirelessly at the same time. Charge additional headphones with the transmitter of this system. * There is no limit to the number of headphones that can be used within the RF signal transmission area. Transmitter MDR-RF5000 (sold separately) Notes • The transmitter turns off automatically while charging. Remove these headphones from the transmitter when using other headphones. • This unit is not compatible with other wireless headphones since this unit employs a proprietary 2.4 GHz wireless digital transmission system. When using additional headphones Each transmitter has its own ID number. When using additional MDR-RF5000 wireless headphones (sold separately), be sure to set the transmitter's ID to that of the headphones, otherwise the headphones will not work. 1 Remove the headphones from the transmitter. The transmitter turns on automatically. 2 Put on the headphones. The headphones automatically turn on. Note Charge the battery of additional headphones before setting their IDs, or use commercially available (size AA) alkaline batteries. 3 Press and hold TUNE/ID SET on the transmitter and that on the headphones at the same time for more than 3 seconds. A repeated beep sound is heard from the headphones and ID setting starts. When the sound changes to a continuous beep sound, the ID number is set for the headphones. Operation 21US